2 Year Warranty
Free Shipping
14-Day Returns
14-Day Returns
Product Pre loader

Let’s get you fit

Enter your height to see your recommended bike size

Size height/inseam range
Rider Height
Inseam Range

Geometry

Abound SR Ebike is available in 1 sizes to suit most adults.

Frame Size One size fits most
A - Seat Tube Length 380mm (14.9")
B - Top Tube Length Horiz. 610mm (24")
C - Bottom Bracket Drop -30mm (-1.2")
D - Head Tube Length 210mm (8.3")
E - Head Tube Angle 69°
F - Seat Tube Angle 70°
G - Rear Chainstay Length 480mm (18.9")
H - Front Wheel Center 673mm (26.5")
I - Wheelbase 1151.5mm (45.3")
J - Reach 420mm (16.5")
K - Stack height 520mm (20.5")
L - Fork Length 395mm (15.6")
M - Fork Offset 38mm (1.5")
N - Trail 63mm (2.5")
Rider Height 4'11" - 6'3"

FAQs

Aventon Control Unit’s 4G/GPS capabilities introduce an array of new features.

  • GPS Location - GPS positioning is performed periodically and the position is updated to the Aventon app.
  • 4G cellular communication - The ACU communicates with cloud servers over 4G cellular networks.
  • Geofencing - Set boundaries where your ebike is allowed or not allowed to go.
  • Report lost - With 4G subscription, the motor assistance can be disabled from the Aventon app, and the bike’s motor will stop functioning.
  • Remote shutdown - The Aventon app can remotely control the shutdown of the ACU via Bluetooth or 4G network.
  • Alarm and Motion sensor - Now you can remotely detect movement and security verification failure, all from the Aventon app. After the shutdown, the ACU’s built-in accelerometer will continuously monitor for vibrations (such as being moved, falling, etc), and will report it through the 4G connection when detected.
  • Status report - With 4G, whether your bike is on or off, the ebike status info like location and battery is directly uploaded to the cloud server when the Aventon app is not connected. Through your Aventon app, you can also receive updates on ebike status and change notification frequency as desired.
  • Ride statistics summary - During your ride - mileage, duration, start/end locations are recorded and uploaded to the cloud server via Bluetooth or 4G, even when your Aventon app is not in use.
  • Transportation Mode - All functions such as status reporting and vibration monitoring can be turned off. For long-distance transportation, reducing the use of ACU’s 4G, can save battery power.
Taking care of your ebike battery is an integral part of getting the most out of your Aventon ebike. Here are a few things to remember:

  1. 1. Charge your battery regularly to avoid fully draining your battery’s stored energy or voltage.
  2. 2. Use the right charger. Only use an Aventon branded and proper model charger (Be sure to place the charger brick on a flat, non-flammable surface like metal or concrete. The charger brick will conduct heat while charging.)
  3. 3. Avoid overcharging your ebike.
  4. 4. Avoid extreme temperatures. Store and charge the battery in a climate-controlled area, keeping it away from both extreme heat and cold.
  5. 5. Maintain the right level of charge. The battery should be stored at 75% charge to its health.
  6. 6. Avoid heavy loads. Do not exceed the bike’s recommended maximum capacity.
  7. 7. Keep your battery, terminal, & ports clean.
Some Aventon models, such as the Level.2, Abound, Sinch.2, & Aventure.2, come with pre-installed fenders and a rear rack. Additional accessories are available for purchase. Explore a wide-range of Aventon accessories, including helmets, locks, bike pumps, and so much more to add to your next riding adventure.
All Aventon-branded frames, framesets, components, and batteries come with a 2-year warranty. Learn more about the Aventon warranty.
Electric bikes require regular maintenance tune-ups similar to traditional bikes and cars. To get the best performance out of your ebike, regularly check tires, tubes, chains, battery, and brakes, or visit a local bike shop for professional assistance. Performing a pre-ride safety check helps maintain your ebike, as well as staying up-to-date on non-electric component maintenance and repairs.
Yes. Class 1 ebikes are pedal-assist only, meaning they have no throttle and can only reach a maximum speed of 20 miles per hour. By removing the throttle on your Aventon ebike and ensuring the max speed limit is set to 20mph, you can configure a class 2 to a class 1 ebike for trail use.
Aventon does not sell conversion kits. All Aventon bikes are already designed with electrical components, such as integrated batteries, motors, and sensors for an optimal riding experience.
The torque sensor design is more intuitive for the rider at high and low speeds, it’s more efficient, has smoother power delivery, and is less prone to damage as the sensor is internal opposed to the external cadence sensor.