Portland Design Works Soda Pop MTB Width Fender Set

These are the recommended fenders for Pace 500 and 500 Step-through E-bikes, tested to fit by our staff.  

PDW's "Soda Pop" fenders are a design you can feel good about riding. They are manufactured from 100% post-consumer recycled beverage bottles. 

  • Clip-on design
  • Set, includes front and rear
  • Fits Pace 500 and 500 Step-through E-bikes, as well as many other makes/models
  • 42mm wide at seatstay bridge; 44mm wide at the underside of the fork, flares to 64mm at the ends to cover wider tires

MOUNTING INSTRUCTIONS

Set aside the mounting bolts that come with the fenders as supplied by PDW. Mount the front fender using a M6 x 60mm socket cap bolt. The rear fender is mounted using a standard water bottle boss bolt. 

Customer Reviews

Based on 10 reviews
10%
(1)
30%
(3)
20%
(2)
20%
(2)
20%
(2)
B
B.B.
Wrong hardware

Fenders are advertised as selected/fit by Avant staff to specifically fit the pace 500 , however as other reviewers have posted both bolts are short, the front bolt isnt even close. Have to get own hardware to make it work. Otherwise good looking lightweight recycled fenders that match well with the Pace.

B
B.V.
Terrible Fit

Front Fender bolt too short for Aventon front fork.
Rear Fender “half moon shaped clips” do not fit Aventon frame. Also rear of fender too mobile. I had to secure it to a luggage rack.
Really poor product. Why not go with a company that makes stuff FOR Aventon bikes?

Hi Brad, thanks for the review and the feedback. These fenders do work on the Pace 500, however, the mounting hardware supplied by PDW isn't compatible as you noted. You can set aside the mounting hardware that comes in the package with the fenders and use these instructions instead: 'Mount the front fender using a M6 x 60mm socket cap bolt. The rear fender is mounted using a standard water bottle boss bolt.'
D
D.M.
better than nothing

Aventon bike is classy, fenders NOT, both bolts wrong sizes. PDW said that’s all we have, try local hardware stores. Aventon could design a lot better looking pair.

Thanks for the feedback. To mount these on the Pace 500, you can set aside the mounting hardware that comes in the package with the fenders. It won't be used. Use these instructions instead: 'Mount the front fender using a M6 x 60mm socket cap bolt. The rear fender is mounted using a standard water bottle boss bolt.' - if you have any difficulty getting it going with the alternative mounting hardware please get in touch so we can help.
S
S.R.
Didn’t fit!

I ordered these with my Pace 500 because they were supposed to fit the bike. They didn’t! The front mounting bolt provided was too short to fit through the supplied hole in the front of the bike. The hole in the back of my bike was too small for the width of the real mounting bolt. I had to bore out the hole in the back and go to Lowe’s for a longer bolt to mount my front. Very disappointed with the fenders that are supposed to fit the pace 500.

L
L.L.
Work well

They are easy to install and they work well. A longer bolt than provided is required for the front fender for the Pace 500. I strap them to the tires when transporting the bike on my vehicle to keep them from vibrating.